Prusa Core One L PTFE Bowden Tube Connector Mod threaded (PC4-M10x1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Core One L handle for PC4-M10x1 coupling
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 217
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Modified right-side handle that accepts PTFE bowden tubes using a PC4-M10x1 fitting for use with external filament dryers/storage.
I modeled the M10x1 thread into the hole so that fitting screws in directly.I also included the model files if anyone wants to make other modifications.
Installing the mod
Step by step instalation, also look at the pictures
Put the fitting on the new printed handle.
Unscrew the side stock handle from the printer.
Pull the existing PTFE tube out of the side handle and trim to 31mm (remove blue wedge that prevents removing the tube)
Insert the cut PTFE back to the connector on sensor
Attach the new side handle as before.
Now you can attach a different PTFE tube to the added connector and route it to your external dryer/storage. Or for the filaments that don't need drying you can feed them directly through the coupling.
Hardware
PC4-M10x1 fitting (I used theese from Amazon).
2x M3x8rT screws (from the orignal handle).
Print Settings that I used
PLA Prusa Orange to match existing handle.
Structural 0.2mm profile with default grid infill at 15%.
No supports needed.
