Hex Storage System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular Craft vinyl storage system. It can be mounted to any flat surface using the Wall Mounts that slot…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 895
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modular Craft vinyl storage system. It can be mounted to any flat surface using the Wall Mounts that slot into any of the cutout sides of the Hex. When assembling you can omit the center of the 6 in a ring form to have a wider holder if needed.
I have tested the wall mount for compatibility on the Hexs but have not tested its mounting to the wall. The Holes are 5mm so most screws should work.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
10
Notes:
I can fit 5 copies of the hex on a single build plate and with my settings it takes 4.5 hours to print them.
Category: DIY