Vertical Ferris wheel Lego Car Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vertical ferris wheel with a handle so you can show off your lego cars on the plates
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a snap together vertical Ferris wheel to show off your Lego cars on their own car plate. This file attached with this post has the already split parts and will be the reference for how to connect the parts together. To start, print all the plates. You will need to print 231 of the included chains.
To start the assembly, snap together plates 13 and 11
Then attach plate 10 to the top of plate 13 and plate 12 to the top of plate 11
Then take any gear that is not the big one on plate 4 and attach it to the knobs on plates 13 and 11
Then connect the gears and loop then around the gears on plates 13 and 11
After that attach the car build plates to the chains
Then, following the pictures on this post attach the remaining normal sized gears and the one big gear as shown
Finally, connect the 2 parts of the handle together and attach it to the very top of the build
