Nielsen meter Crystal Charm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple diamond shaped pendant designed to hold a Nielsen personal meter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple and discrete(ish) pendant to hold a Nielsen personal meter. Designed for a child that refuses to wear it as a watch, clip or plain lanyard. Includes a large hole for a necklace chain.
This does not modify the meter or interfere with its operation. It also allows charging the device without removing from the pendant. A note of caution, it is somewhat difficult to remove the device once inserted.
DO NOT INSERT THE DEVICE SCREEN SIDE OUT OR IT WILL GET STUCK AND MAY DAMAGE THE DEVICE. This was deliberately designed to cover the screen and keep the charge port accessible. Make sure to align the front sensor aperture with the hole.
Looks pretty cool in translucent glow filaments. No supports needed if you print face down, otherwise I recommend supports under the hole or add a thin sacrificial layer.
This is an unpaid commission for an acquaintance, I am not affiliated with Nielsen.