Takeaway Coffee Clicker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses keyboard switch for a satisfying click!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A clicker shaped like a takeaway coffee cup. It requires a clicky keyboard switch of the type where the keycap mounting point cross is on rectangular base - see picture for more detail on the type I used.
The lid makes use of support using a different material so that it can be printed with the void underneath. In my case I printed it in PETG and used PLA for the interface layer only. If your printer isn't able to do this, it may still work - but I think it could be a pain getting all the support material free from the underside of the lid.
I've included my .3mf files for those with a FlashForge Creator 5, and plain .step files for those using a different machine. I've also supplied the (messy) FreeCAD file for those who like to tinker.
If you're painting the .step or .stl versions using your slicer, I found it's best to select the main material colour first, and then paint the white bits on last. That way it prints within about 30-40 minutes. Do it the other way around it'll mean 2 or 3 times the print time (don't ask how I know!).
Not much more to add really.
I'm off to grab a cuppa cawfee
Happy Printing