Rubber Damper for RØDE PSA-1 Microphone Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small and simple TPU rubber damper for the bottom clamping screw of the RØDE PSA1 microphone arm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 1
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Problem
On my old desk, the lower clamping screw used to leave a noticeable mark when tightening the microphone arm. Since I recently got a new desk for my home office, I wanted to avoid leaving any marks or dents in the new tabletop.
So I quickly made this small rubber damper. It sits between the clamping screw and the desk and distributes the pressure over a larger area.
It fits perfectly and, most importantly, no more marks on the desk!
Print Settings
Material: Extrudr TPU Flex Hard
Nozzle: 0.4 mm
Layer height: 0.2 mm
Other flexible materials should work as well.
The part is small and requires very little filament, so it is a quick and easy print that can help protect your desk from pressure marks :)