HG Gundam HGTWFM 1/144 Demi Trainer custom shield adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom clip-on adapters for the HG 1/144 Demi Trainer (Gunpla). Mount shields directly to the shoulder armor or backpack
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This set contains two custom clip-on adapters, I designed for the High Grade (HG) The Witch from Mercury Demi Trainer.
They allow you to mount the kit's shield directly to the shoulder armor or backpack without relying on existing hardpoints on the MS itself.
The adapters simply clip onto the edges of the armor or backpack structure and provide mounting holes for the shield's built-in 3mm peg.
The set includes:
Small Shoulder Adapter: A compact U-clip designed to securely attach the shield to the edge of the shoulder armor.
Large Backpack Adapter: A wider clip featuring three holes, allowing you to mount the shield to the backpack at three different height levels for perfect positioning.
Recommended Print Settings:
Material: PLA, PETG, or ABS/ASA (PETG or ABS/ASA are highly recommended. The clip-on mechanism requires a slight amount of material flexibility, and these materials hold up better to repeated plugging of the 3mm peg).
Layer Height: 0.12 mm or finer to ensure precise tolerances for the clips and the 3mm holes.
Walls & Infill: The models are designed with very thin walls. They will print entirely as perimeters (2 wall loops), making infill settings irrelevant.
Supports: No supports are required when printed flat on their side.
Bed Adhesion: Due to the small contact area, using a brim or raft is recommended to ensure the parts stay secured to the build plate during printing.
Assembly Tip: Since the parts need to snap onto the armor, ensure your flow rate is calibrated. If the 3mm holes are too tight for the shield's peg, gently widen them with a pin vise or sandpaper to avoid stressing and cracking the clip.
