Corellian Framework
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Corellian-inspired Framework Laptop 12 enclosure with rear exhaust, hidden cable routing, and optional side cannons.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A desktop enclosure inspired by Corellian ships, built around the Framework Laptop 12 mainboard. The ship's rear exhaust forms the cooling outlet, the stand routes cables beneath the ship, and a drop-in pin reaches the onboard power button from below.
Models for both side grilles and cannons are included. To me, cannons are the obvious choice, but I'll leave that up to you.
The picture guide walks through assembly and mainboard installation. Hardware:
- 53 × M3 × 8 mm screws
- 4 × #4 × 3/8″ screws for the lower ship panels to the computer case
- The mainboard's original captive screws (T5 driver)
The photographed prototype is printed in PLA at 0.20 mm layers. For the computer case and exhaust vents, I'd choose PETG, ABS, or another suitable higher-temperature filament. Fit was checked against Framework's reference CAD; I haven't tested the enclosure with a live mainboard or under heat loads yet.
The parts are designed to minimize supports and print separately in your chosen colors, reducing filament changes and waste.
I was inspired to create this for the Framework mainboard contest and used the reference CAD to position the board, mounts, ports, and power button. I'm looking forward to seeing what others do with it and where the remixes take it.
Framework reference CAD used for fit and illustrations: Framework Computer Inc., Laptop 12 Mainboard
Reference geometry repositioned and recolored in illustrations.