Spice Rack for Bekith Spice Bottles

This is a spice holder intended to be mounted on a cupboard door.  It is specifically designed to be used Bekith Spice Bottles (5.5cm x 5.5cm x 12.5cm).   It was designed to have a clean, satisfying look and feel to it.  The bottles fit in snugly, with just enough clearance to not catch when bottles are being inserted or removed.  The bottles are all clearly visible for fast selection, and there is thumb divot at the bottom of each part to allow for a fast convenient grip.

The spice rack itself can be mounted with 3/8"  #6 screws -- (note -- double check the thickness, especially against any reliefs in the door front to make sure you don't go all the way through).    You could also use double sided tape if you trust it.

I've included several models -- If you have enough room on your printer bed, you can print any of the All series depending on the number of bottles you want.   Otherwise, if you need to break up the print into several parts due to print bed size, you need to print the left, the right and the correct number of middle pieces.   Glue with crazy glue -- the pieces all  have tabs for fast and reliable alignment.