Gridfinity 2x1 bin 4x divider add-on for cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of @AndreasMass add-on that keeps small parts in a Gridfinity 2x1 bin with a 4x divider truly separated.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It might seem pointless to make a 2x1 bin with four compartments instead of using two 1x1 bins, each with two compartments. But for me, it makes sense to store lots of different small parts in one bin, which is why I made this special divider.
My print settings:
Make sure to have no infill
3 perimeters
4 layers top and bottom
Generic PETG Structural (PLA is probably also ok)
Please see also my other Gridfinity tool bins, cases, and parts: https://www.printables.com/@trses/collections/3756947
If you find my work useful, you might consider buying me a coffee. But of course, you don't have to - my designs are free and always will be.