1 / 3
Staedtler Noris Jumbo sleeve for Boox (magnets + pocket clip) — zdjęcie 1
1 / 3

Staedtler Noris Jumbo sleeve for Boox (magnets + pocket clip)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

C-clip sleeve for Staedtler Noris digital jumbo: magnets for Boox Note Air 3C edge + pocket clip.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

C-clip sleeve for the Staedtler Noris digital jumbo stylus.

It adds:

- A snug C-grip around the jumbo barrel (rounded triangular faces — the jumbo is not flat-sided)

- Magnet pockets to stick to the long edge of a Boox Note Air 3C

- A pocket clip for paper or a pocket when you’re not using the tablet magnets

Inspired by:

https://makerworld.com/en/models/1204966-pocket-clip-for-staedtler-noris-digital-jumbo

Magnets

- Designed for Ø5 × 1.6 mm disc magnets (pockets Ø5.2 × 1.7 mm)

- Default: 3 magnets, 18 mm center-to-center on the clip plate

- Onyx does not publish the Boox edge polarity map. Before gluing: hold each magnet to the Boox edge; the face that attracts goes facing out (toward the tablet). Mark that face, then press the magnets fully into the pockets. A tiny drop of CA glue if they’re loose.

Printing

- Orient the flat magnet face UP (open pockets)

- 0.2 mm layer height, 3–4 walls, 15–20% infill

- Usually prints without supports with magnets up

- ASA/ABS preferred if you want something tougher; PETG also works

Fit on the pen

- Flex the slit open and slide from the yellow/black body — not from the eraser end

- Leave tip and eraser free

- Magnet plate against the Boox edge; the hook works as a paper/pocket clip

Tagi