1 / 6
UPM-105 Machine Torch Laser Cross hair Mount — zdjęcie 1
1 / 6

UPM-105 Machine Torch Laser Cross hair Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Laser cross hair Mount for UPM-105 machine torch

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

this will mount on the body of the UPM105 machine torch and the laser modules will slide into the the holders on the X and Y axis. Each Module will get two M3 heat set inserts for setscrews and the entire mount will get one M3 heat set insert in the corner of the X and Y axis arms.

 

These are the laser modules I am using. https://www.amazon.com/dp/B0CKP4SYL7 they will will be wired into a dedicated 5v power supply and control via the control panel on the Centroid Acorn plasma Controller software.

Do not forget the laser safety glasses, these are in the realm of potential eye damage https://www.amazon.com/dp/B0CQQZCYX9?ref=ppx_yo2ov_dt_b_fed_asin_title

This was printed in:

ABS

5 walls

30% infill

PETG supports

Tagi