Bird feeder with accessories / Karmnik dla ptaków z akcesoriami
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bird feeder for small birds with three mounting options and two seed container versions.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The bird feeder is designed for small birds such as tits, sparrows, and bullfinches. Thanks to its extended roofs and deeply positioned seed trays, it is well protected against rain and pigeons.
Three mounting methods!
Hang it with cords using the eyelets at the ends of the roofs.
Place it on a pole (maximal diameter 20 mm) using the large hole at the bottom of the feeder.
Use the included additional bracket, which can be screwed to a wall or fastened with zip ties; the bracket features an extra eyelet for hanging a fat ball.
Two types of seed containers!
You can attach a standard European TO-82 size glass jar with a 6-lug thread to the feeder. This is the most popular jar size, commonly available in capacities ranging from 235 mL to 900 mL (often used for food preserves). The advantage of the jar is its transparency, making it easy to see from a distance whether it is full or empty. The disadvantage is that you must take down the feeder and turn it upside down to refill it.
Alternatively, you can attach the included 3D-printed container with a lid. Removing the lid allows you to top up the seed without taking down the entire feeder, though the printed container is opaque. Three versions of the container are included, with capacities of approx. 300 mL (d86 h60), 460 mL (d86 h90), and 620 mL (d86 h120). If you need a container with a different capacity, you can generate one yourself using the included FreeCAD source file (Container.FCStd). Instructions on how to do this can be found in the attached PDF file.
All parts are designed to be printed without supports. Test prints were made with:
PLA filament.
0.2 mm layer height.
15% – 20% infill.
Warning! The feeder should be mounted or hung no higher than 1.8 m above ground level. In particular, do not hang the feeder above a pavement, road, door, or entrance gate. A falling feeder may pose a risk to health and property.
Karmnik jest przeznaczony dla małych ptaków, takich jak sikory, wróble i gile. Dzięki wysuniętym daszkom i głęboko umieszczonym tackom z ziarnem jest dobrze zabezpieczony przed deszczem oraz gołębiami.
Trzy metody mocowania!
Powieś na sznurkach, wykorzystując oczka na końcach daszków.
Nałóż na kij (maksymalna średnica 20 mm) wykorzystując duży otwór od spodu karmnika.
Użyj załączonego dodatkowego uchwytu, który można przykręcić do ściany lub przymocować opaskami zaciskowymi. Uchwyt ma dodatkowe oczko do powieszenia kuli tłuszczowej.
Dwa rodzaje pojemników na ziarno!
Na karmnik można założyć szklany słój w standardowym, europejskim rozmiarze TO-82 z sześciobruzdowym gwintem. To najpopularniejszy rozmiar słoja, standardowo dostępny w rozmiarach od 235 mL do 900 mL. W takich słojach są na przykład sprzedawane przetwory spożywcze. Zaletą słoja jest jego przeźroczystość, także z daleka widać czy jest on pełny czy pusty. Wadą jest konieczność zdjęcia karmnika w celu napełnienia i odwrócenia górą na dół.
Na karmnik można również założyć załączony drukowany pojemnik z pokrywką. Po zdjęciu pokrywki można dosypać ziarna bez zdejmowania całego karmnika, lecz wydrukowany pojemnik będzie nieprzezroczysty. Załączono trzy wersje pojemnika, o pojemności ok. 300 mL (d86 h60), 460 mL (d86 h90) i 620 mL (d86 h120). Jeżeli potrzebujesz pojemnika o innej pojemności, to możesz go wygenerować samodzielnie, wykorzystując załączony plik źródłowy programu FreeCAD (Container.FCStd). Instrukcję jak to zrobić znajdziesz w załączonym pliku PDF.
Wszystkie elementy są przystosowane do druku bez podpór. Próbne wydruki wykonano dla:
Filament PLA.
Grubość warstwy 0,2 mm.
Wypełnienie 15% - 20%.
Uwaga! Karmnik należy umocować lub zawiesić nie wyżej niż 1,8 m nad poziomem gruntu. W szczególności, nie należy karmnika wieszać nad chodnikiem, drogą, drzwiami czy bramą wjazdową. Spadający karmnik może stanowić zagrożenie dla zdrowia i mienia.