Crash bar protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy-duty universal crash bar sliders designed to protect your motorcycle's engine guards from impact and slides. Stron
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a heavy-duty, two-piece universal crash bar slider designed to protect your motorcycle's frame or engine guards during crashes or slides. The deep recessed pockets protect the bolt heads from being ground down during a slide, making it easy to remove and replace the protector later.
Hardware required (per ONE protector):
4x DIN 912 M5x30 Hex Socket Head Cap Screws
4x M5 Standard Hex Nuts
Printing Recommendations:
Material: PETG-CF (Carbon Fiber filled) is highly recommended for maximum impact resistance, beautiful matte stealth finish, and low friction during slides. High-density TPU or ASA can also be used.
Infill: 100% Solid (Crucial for structural integrity and impact absorption).
Perimeters / Wall Lines: 4 minimum (if not using 100% infill layout).
Supports: Not required / Minimal depending on your bridging performance.
Designed by an engineer, built to take a hit so your bike doesn't have to. Print it, bolt it, ride it!