Universal VFD Bracket for Chinese Drill Presses (Zubr ZSS-350, Einhell BT-BD 501, etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A heavy-duty, vibration-resistant VFD (Variable Frequency Drive) control box and mount. Designed to bolt directly onto t
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a robust, custom-engineered mount and protective housing for a VFD speed controller, designed to upgrade standard desktop drill presses. It is a direct bolt-on replacement for the factory mechanical Start/Stop button box, utilizing the original mounting holes on the cast-iron head of the machine.
Confirmed Compatibility:
Designed around standard Chinese-made desktop drill presses sold under various brands worldwide:
Zubr ZSS-350 (Зубр ЗСС-350)
Einhell BT-BD 501
Equivalent models from Kalibr, Korvet, Femi, Scheppach, Silverline, and other generic 350W-500W desktop drill presses sharing the same cast housing geometry.
Features:
Replaces the unreliable stock switch box with an ergonomic speed control setup.
Features heavy internal stiffening gussets to eliminate flexing from belt tension and motor vibration.
Integrated protective visor/hood above the control panel to shield the screen and potentiometer from flying metal chips.
Open slots at the bottom and back for proper passive ventilation of the VFD unit.
Hardware required:
Uses original screws/bolts from the stock machine start/stop button housing to attach to the cast iron head.
4x standard machine screws or self-tapping screws to secure the VFD enclosure inside the frame.
Printing Recommendations:
Material: PETG, ASA, or PETG-CF (Carbon Fiber filled). Highly recommended to use chemical/oil-resistant filaments since the part will work in a workshop environment with cutting fluids and oils.
Infill: 30-50% (Gyroid layout works best for vibration damping).
Wall Lines / Perimeters: 4 layers minimum for high structural strength around the mounting flange.
Upgrade your workshop drill press with smooth, frequency-controlled speed adjustment!