AcroMaster Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Multiplex AcroMaster motor mount for a Waypoint outrunner.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Open Community License v1.1
I needed to put a motor in my old AcroMaster and had a Waypoint W-E3020-12 on the shelf. Since this motor have a 25x19 mm hole pattern, I made a new the motor mount. (The original mount was designed for 25x25 mm)
Print Info
Nozzle: 0.4 mm
Layer: 0.15 mm
Perimeters: 3
Infill: 100% rectilinear
Support: no
Filament used: add:north PETG White
Additional Hardware
4x M3x4 threaded inserts.
8x M3x8 screws.
2x M3x16 screws.
Assembly
Insert the four threaded inserts in the corner holes.
Screw in the four motor angle adjustment screws. Check the aircraft's manual for details,
Screw the motor in place.
Connect the motor drive leads to the speed controller.
Screw the motor mount into the fuselage.
Cover Photo
The plane has been around for 18 years. It has become somewhat less white and crispy since then.