1 / 2
Stanley 40oz Marine Cupholder — zdjęcie 1
1 / 2

Stanley 40oz Marine Cupholder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cup holder and stabilizer for Stanley 40oz mug, made for mounting on 1" diameter tubing. Either horizontal or vertical.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a cupholder I made for use on a boat to stabilize a Stanley 40oz mug, especially while heeling over. It uses two hex bolts to mount on a 1" tubing like a stantion, helm support, or bimini. It is best used where the mug can be supported as in the photos. I used 50%+ infill for strength.

Tagi