Bottle Dryer (Flaschentrockner)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to dry Sodastream FUSE bottles (1 l & 0,5 l)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🆕 Welcome to my first published 3D model 🆕
I have designed this stand to dry my Sodastream FUSE bottles (1 l & 0,5 l).
It can also be used with any other bottle with an opening between 28,6 and 37,5 mm.
The stand has a built-in spacer to prevent water from pooling inside the bottle neck.
With its 7 mm high rim the dripping water won't run onto your countertop.
Features
bult-in spacer
all-around rim
usable with various bottles
Material
I used black matte PLA from Elegoo. Should be fine for this short unpressurized exposure to water. Printing with 4 walls should improve the print. If you want more resistance against water leaking, use PETG instead.
Settings
generic PLA profile
20 % infill (Gyroid)
2 walls
If you’re enjoying this model, here are some simple ways you can support me:
👍 Give it a like.
✏Let me know what you think in the comments.
💾 Grab the file.
Enjoy printing!