FlowTray Series – Original 6 | Stackable Organizer Tray With Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable six-compartment tray for tools and small parts. Compatible with all trays in the FlowTray Series.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep your workbench organized with the FlowTray Series – Original 6, a compact sorting tray with six compartments for tools, screws, nuts, washers and other small parts.
Features
Six compartments: one long tool channel, one larger parts compartment and four smaller sorting compartments.
Sloped retrieval surfaces for easier access to small parts.
Rounded corners and a single-piece design.
Stackable with all organizer trays in the FlowTray Series.
No assembly, magnets or additional hardware required.
Dimensions
168 × 118 × 20 mm
Nominal wall and base thickness: 2.4 mm walls / 4.8 mm base.
Stacking
The underside locates inside the rim of the tray below, allowing you to combine different FlowTray Series layouts in one stack.
Keep contents below the stacking area and remove protruding tools before placing another tray on top. The trays rest together without a locking mechanism.
Suggested print settings
Orientation: Flat base on the build plate, compartments facing up.
Nozzle: 0.4 mm.
Layer height: 0.2 mm.
Walls: 3 perimeters.
Bottom layers: 5.
Infill: 15–20%.
Supports: Designed to print without supports.
Material: PLA is a starting option for indoor storage.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale to preserve stacking compatibility.
Files and validation
STL, STEP and a geometry-only 3MF are provided, together with editable CAD source files. The 3MF does not contain a configured printer profile.
The model has been digitally checked but has not been physically test-printed or slicer-tested. CAD checks confirm a closed mesh and nominal stacking clearance; actual fit depends on your printer and print settings.
All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and your feedback on the stacking fit!