Tikka 3X Hog Saddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have no idea how many of the Tikka stocks are a match to the Tikka #x lite I have but when I went looking for a hog…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I have no idea how many of the Tikka stocks are a match to the Tikka #x lite I have but when I went looking for a hog saddle to make there was not much of a selection to work with.. The tikka stock has a bolt ahead of the lug that is not used, there is probably a factory part for this exact thing but here is my version. Anyways I used that factory bolt witch was a 5mm x 20 on mine, I picked up an 30mm version which still did not extend beyond the stock into the barrel.
This is of course done up to match the quick disconnect plate on the tripod I have.
I have included a little bit of a gap between the saddle and the stock so I can put a stick on felt sheet to keep the stock from being damaged.
For now I have just printed it at 25% infill but I'm sure I'll be playing with it to increase the strength or I will be molding and casting it into a resin
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
200
Infill:
25
Filament: SPOOL3D PLA pale yellow
Category: Sport & Outdoors