FlowTray Series – Tool 6 | Stackable Tool Organizer Tray With Lids

Organize long hand tools and small accessories in one compact tray with the FlowTray Series – Tool 6.

The layout combines two full-width tool channels with four smaller compartments. It is suitable for items such as screwdrivers, tweezers, hobby knives, markers, measuring tools, bits, screws and other workshop accessories, provided their dimensions fit the compartments.

Features

• Two long full-width tool channels.

• Four compartments for small parts and accessories.

• Sloped retrieval surfaces for easier access.

• Rounded internal corners.

• Stackable with all organizer trays in the FlowTray Series.

• Single-piece design with no assembly, magnets or additional hardware required.

Dimensions

• Overall size: 168 × 118 × 26 mm.

• Long tool channels: 163.2 × 33.0 mm each.

• Small-parts compartments: 39.0 × 42.4 mm each.

• Nominal wall thickness: 2.4 mm.

• Nominal base thickness: 4.8 mm.

The compartment dimensions describe the openings below the rim chamfer. Rounded corners and the retrieval ramps reduce the completely flat base area. Measure larger tools before printing; no fit is guaranteed for a specific tool or brand.

Stacking

The underside locates inside the rim of the tray below, allowing different FlowTray Series layouts to be combined in one stack.

Remove tools that extend above the stacking area before placing another tray on top. The trays are gravity-stacked and centered by their geometry; they do not use a snap-fit or locking mechanism.

Suggested print settings

• Orientation: flat base on the build plate, compartments facing up.

• Nozzle: 0.4 mm.

• Layer height: 0.20 mm.

• Walls: 3 perimeters.

• Bottom layers: 5.

• Infill: 15–20%.

• Supports: designed to print without supports.

• Material: PLA is a suitable starting option for dry indoor storage.

These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale to preserve stacking compatibility.

Files and validation

STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.

The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.

The model has not yet been physically test-printed or slicer-tested. Actual fit depends on your printer, filament and print settings. All preview images are CAD renderings, not photographs of a printed model.

If you print it, please share a Make and let me know how the stacking fit works on your printer.