Wind Speed Gauge - Flag Pole Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach a Anemometer Wind Gauge to a Flag Pole
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bracket that clips onto a Flag Pole to hold an Anemometer Wind Gauge.
When RV camping I set up a telescoping flag pole mounted to the RV to fly my flags. I use this bracket to mount my weather station's Anemometer to the pole. It snaps onto the flag pole; positioned high enough to be above the roof of the RV.
It is sized to have an interference fit to the 3rd pole section (from the top) of a 5 section flag pole. There is enough flex to allow the legs of the bracket to spread open enough to fit around the pole while installing but still hold tightly.
There is enough flex to allow the legs of the bracket to spread open enough to fit around the pole while installing but still hold tightly.
Printed in PLA with brims to help keep the curved leg sections attached to the bed.