Tapo C121 Outdoor Camera Shield and Sun Visor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tapo C121 Outdoor Camera Shield & Sun Visor used to protect the camera and USB connector from the harsh northern weather
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I wanted to provide enhanced weather protection to the USB cable connection on the rear of the C121 camera in outdoor use. I designed this in Fusion. It is a light friction fit on the circular diameter of the camera. There is a slit on the bottom for full use of the factory magnetic stand. There is a plastic barrel clamp to cover the slot and tighten the housing on the camera. You need two self tapping 3mm screws for the band. Mine is placed on the gas meter and printed in grey to blend in with the gas meter clutter.