Arteries of the Brain Model Kit (Circle of Willis)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A card kit (kit card) of the Circle of Willis, the arteries of the brain, for manual assembly and active learning.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
This project uses a split Creative Commons license to maximize educational use while protecting the open design:
3D Model Files (
.stl,.3mf, etc.): Licensed under CC BY-SA 4.0. You may modify and redistribute the 3D files, but you must attribute the original author and share your modifications under the same ShareAlike license.Physical prints, Photos, Diagrams, Slides, and Documentation: Licensed under CC BY 4.0. You are free to use, adapt, and embed these derivative works into any educational, commercial, or proprietary materials. You only need to provide appropriate attribution.
Labeled vs Unlabeled, Snap vs Cut:
This kit comes in four flavors: a labeled and unlabeled version, each with a cut and snap version. I recommend printing the unlabeled snap version. On my Core One, this prints for just under 65g in 1 hour and 45 minutes.
Labeled: These have small 3d printed labels on some of the major arteries on one side using standard abbreviations
Unlabeled: Only models of the arteries exist. You may use tape or string or something else for manual labeling exercises. (recommended)
Cut: If you print on a 0.28 draft profile with a 0.4mm nozzle, the interlinks will (should) print two across (0.8mm) and three tall (0.7mm). This is strong enough using most PLA that you'll want to use nippers to remove the parts instead of pulling them apart.
Snap: If you print on a 0.28 draft profile with a 0.4mm nozzle, the interlinks will print 1 across (0.7mm) and three tall (0.7mm). This is strong enough to resist most unintentional breakage but weak enough to pull apart without breaking the parts. (recommended)
Description:
2D depictions of the Circle of Willis are difficult to understand as 3D objects. The 3D sculpture (seen here) can even be overwhelming to study and memorize, and it is distinctly not easy to print on bedslingers. This kit allows the learner to spend time with each of the major arteries of the brain and the Circle of Willis so that they can have a tactile memory of their locations. This is fundamentally important for further exercises like localizing ischemic lesions.
WIP:
I will be publishing a guide PDF as instruction for putting this thing together. For now, I have included a step file and 3mf of the assembled model. This should make it possible to assemble if you're careful.
Print Settings:
I have found this to be most efficiently printed with the following settings. They are optimized for print speed and material usage without compromising functionality. This will be very useful when printing a bunch for a class.
Base profile - Core One Draft Profile
Supports - None
Layer height - 0.28mm

Infill - It only needs 5% and Line infill.

Important Modifications -
Top - Only needs enough to not sag: 3 layers
Bottom - Only needs 2

Seam position - random (EXTREMELY IMPORTANT, if aligned or nearest are used, the seams may be put in a row on a female snap socket, which can weaken the connection and cause it to break on insertion).
