1 / 4
Spacer for Lie Nielsen No 62 on Veritas Shooting Board Track — zdjęcie 1
1 / 4

Spacer for Lie Nielsen No 62 on Veritas Shooting Board Track

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fills the gap left between the Veritas Shooting board track adjustment rail and the sidewall of a Lie Nielsen No 62.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

The Vertias shooting board track has an adjustment rail that is supposed to constrain the sidewall of the plane so it tracks straight.  Which is a great idea but it doesn't have enough adjustment to make the track narrow enough for a Lie Nielsen No 62 plane.  

This spacer fits around the curve of a No 62 plane sidewall and fills the gap (with the adjustment rail installed and set to its widest spacing).  

It's pretty simple, just plop it in there next to your plane and, viola, the gap is filled and the plane can go back and forth without getting skewed.  I've found this to be very helpful with beginners and kids who aren't used to shooting boards.

I printed this in PLA, nothing fancy - no supports, 15 percent infill and it's working great.  If it gets used so much it wears down, I'll just print up another one (or use this as a template and make one out of hardwood).

Tagi