Prusa Core One Buddy3D Camera Angle Mod – Better View. Screw attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to allow attaching with a screw to ensure better hold
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
After the magnets failed to hold it properly and the camera fell, ruining a print, I decided I wanted a version of this which could not detach.
It uses a single m3nS nut. You'll need to replace the m3x4 socket head screw which comes in from the top of the case with an m3x8.
Note that, because this screw is already screwing in to threads to hold the frame together, it won't pull the camera in tight to the frame. I recommend pushing the camera firmly upwards while you tighten the screw, which will minimize the gap between the camera and the frame. It still needs the magnets, but with the screw in place, it definitely won't fall off.
f3d file included for anyone who wants to mod this for different magnet sizes.