Bambu Lab X2D Accessory Box

In order to assemble the box, all you need to do is line up the hinge holes and insert a piece of filament through the holes. Just trim the edges and the tolerances should be tight enough to hold it in place. This applies for the main hinge on both the hollow and normal design. The latch on the hollow box has a slot for filament as well, but meshes with the bottom hollow piece. The "Hinge" piece ONLY applies to the hollow box.

I made this box when I got my X2D and I realized that I hated the cardboard packaging (y'know the one where you always break the little tabs because it doesn't want to open?) I decided that making a box that could hold the same things, in a similar way, but I wouldn't have to deal with the cardboard.

The box holds the exact same things that are in the accessories box (allen keys, lubricant, extra nozzle, etc.), but is a better package imo. I also made a separate version where instead of printing the internal holders, you just slide the original plastic holder into a different shell. The hollow box had different dimensions from the normal one so don't print the non-hollow lid with a hollow bottom and vice versa. The hollow one has a locking hinge so I prefer it.

I made this in onshape and took the dimensions of the items from the original packaging of the box.