1 / 5
Cosplay In Loving Memory Urn with Screw-on Lid. V2. — zdjęcie 1
1 / 5

Cosplay In Loving Memory Urn with Screw-on Lid. V2.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No Supports. Cavity at bottom for Concrete, plaster of Paris, Clay, etc. to add weight at the bottom.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Share Alike

Cosplay. In Loving Memory Urn with Screw-On Lid. V2

This is a variation of https://www.printables.com/model/1263992-cosplay-in-loving-memory-urn-with-screw-on-lid 

No Supports required!

See the cross-section design image to see interior profile.

Cavity at bottom for additional weight, like concrete or clay.

If you want a heavier prop, fill the bottom cavity with something like concrete that sets up; you don’t have to worry about it coming out due to the tapered design.

This model is not “tippy.” You don’t need to fill that cavity with anything, but you may want some heft to your cosplay prop.

Designed as a single-color print, but…

If you want, you can paint color onto the text and design in your slicer, but it is not as easy as with the prior version. All of the memorial features do have sharp edges, so you can pick them as objects with “smart fill.”

The Memorial imagery is extruded out  of the urn 1mm. Many cosplay props are painted by hand to give them a great look. And often it does not look like plastic. 😉 Post a pic of your prop!

Enjoy! Comments📝, likes❤, ratings🤩 appreciated and encouraged!

Tagi