1 / 2
Chainring Guard / Kettenblattschutz 120mm 5 holes — zdjęcie 1
1 / 2

Chainring Guard / Kettenblattschutz 120mm 5 holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bicycle chainring guard with 5 holes arranged in a 120mm circle. Outer diameter 173.5mm.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I recently broke my bikes chainring guard. It looks worse than it is, the chain and the chainring themselves are fine. But the thin plastic cover on top of the chainring was broken. 

The guard was attached with 5 countersunk thermoplast screws with 3mm outer diameter and 5mm thread length. The holes in this part are 6.5mm deep and arranged evenly on a 120mm circle. Outer diameter of the guard is 173.5mm.  

Printing instructions

Print from ASA if you can, for best UV protection. Black PETG might also work reasonably well. I used black Prusament ASA for mine.

Tagi