Tailfin Fork Pack Hook Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows mounting a 10 L Tailfin Fork Pack on the left side of a fork equipped with a Paul Klamper Mechanical Disc Brake.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
You'll most likely run into problems when trying to mount a Tailfin Fork Pack on the left side of a fork equipped with a Paul Klamper Mechanical Disc Brake. The X-clamp attaches fine, but the large brake caliper prevents the Fork Pack from getting close enough for the lower hook to engage with the fork mount.
This spacer offsets the hook by 10 mm, allowing the Tailfin Fork Pack to be safely attached without touching the brake caliper.
Install the hook and spacer using longer stainless steel M5 x 20 mm mounting screws. For added security, apply thread-locking fluid as used on the original screws.
I used PETG filament for printing the spacer.