Spool Filament (Wall)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mount spool holder for 3D printer filament. Fits aluminum profiles up to 30×30 mm. Easy PLA/PETG/ABS print, 0.4 mm
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
A simple, robust wall-mounted spool holder designed for 3D printer filament rolls. It attaches directly to standard aluminum profiles up to 30 × 30 mm (e.g., 2020, 2025, 3030 extrusions) and keeps your filament organized and tangle-free right next to your printer.
Features
Fits aluminum profiles up to 30 × 30 mm
Easy to print in PLA, PETG, ABS, and similar materials
Optimized for 0.4 mm nozzles
Minimal material usage, fast print time
No additional hardware required (unless you add bearings/rods in your variant)
Print Settings
Nozzle: 0.4 mm
Layer height: 0.2 mm (0.15–0.25 mm also works)
Infill: 20–40% (PLA/PETG: 20% is usually enough)
Walls: 2–3 perimeters for stability
Supports: Not required (oriented for easy printing)
Material: PLA, PETG, ABS, ASA, etc.
Assembly / Mounting
Print the required parts (usually 1× or 2×, depending on your design).
Slide or clip the holder onto your aluminum profile (max. 30 × 30 mm).
Insert your filament spool and feed the filament to your printer.