Adimlab Y Axis Tensioner with Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Y axis belt tensioner bracket and pulley that somebody on the Adimlab Facebook group made a while back.…
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 94
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Y axis belt tensioner bracket and pulley that somebody on the Adimlab Facebook group made a while back.
Hardware; Use the original hardware that came with the printer Y axis tensioner. For the adjustment screw if the original screw doesn't work use an M3 x 25mm screw. On mine I also put a washer between the bearing and the pulley part on both sides of the bearing.
For a really polished look, use the included knob that fits the M3 wingnut.
UPDATE: 5/13/19 I didn't like the tolerance on the pulley between the belt and the screw head so I made it 1.3mm longer.
Print Settings
Resolution:
0.2
Notes:
Print as oriented with high infill of 50% to 100% infill. The knob will be fine with 25%.
Category: 3D Printer Parts