Addis folding step stool mounting hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Over-door hook that stores a folding step stool. No screws, no holes — fits 12mm ply, sized for the handle slot
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple hook that goes over the top of the Adria Twin garage door/partition and holds an Addis folding step stool out of the way when it's not needed.
Sized for:
12mm plywood (the channel is 13mm, so it slides on without slop)
A folding step stool of the Addis type, whose handle slot the profiled block is shaped to match
10mm clearance above the door to the bed frame
Stick it to the door with a bit of 3M tape and stick a strip of 6mm foam or some hook-and-loop on the back face to stop it rattling on the move. Velcro also stops the step hopping off over a pothole.
Print settings
Material: ASA (for heat and UV), though PETG is fine indoors
0.2mm layers, 7 perimeters, 25–30% gyroid infill
Print the profile flat on the plate, as shown, so the layers follow the curve rather than crossing the bends
Brim recommended for ASA; no supports needed
No infill in the 5mm walls: the perimeters fill them solid