RUBIX CUBE ( FUNCTIONAL )

3x3 Rubik's Cube  

It is fully custom rubix cube designed by me and it looks supper cool with its fancy color. It gives you a smooth rotation which is required. It also need some parts which can be 3D printed but its better for you can get it from somewhere maybe old rubix cube. Also it have small and thin  sq.  of different color palette which looks good ig. 

Each center piece attaches to it core arm through a  spring loaded screw , It allows free rotation while holding all the edges and corner parts securely.
Well its not going to be that fat cause its 3d printed

-> Parts

• Core — 6-armed central spider that every other piece mounts to or interlocks around

• Center — 6x, one per face; the only pieces mechanically fastened to the core

• Center Cap — 6x, outer face cover for the center piece, conceals the screw/spring assembly

• Middle Edge — 12x, showing two colored faces, captured purely by interlocking geometry

• Corner — 8x, showing three colored faces, captured the same way

• Color Palette ( 6 faces)

Hardware (per arm, ×6) :-

• Screw: M3 × 16mm

• Spring: 5mm OD × 15mm free length, 0.5mm wire

• Nylon washer: M3 × 6mm OD × 1mm

• Heat-set nut: M3, 4.5mm OD × 4.5mm (optional, for durable re-tensioning)

Designed with an 8mm core arm diameter and O-ring groove for smooth, controlled turning resistance.

Assembly :-

1. You need to screw 5  of the centers into the core.

2. Now assemble the cube layer by layer, by adding the edges and corners.

3. Screw in the final center piece so that it have its grip and close the final the mechanism.

4. At last stick the small and thin  sq.  of different color palette with the help of glue

FOR BETTER AND SMOOTH ROTATION MAYBE ADD OIL INTO THE GAPS , I GUESS IT WORKS