Adimlab Y Stepper Mount for 2nd Damper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Y stepper bracket for a 2nd damper that can be added along with my Adimlab Y stepper mount…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Y stepper bracket for a 2nd damper that can be added along with my Adimlab Y stepper mount https://www.thingiverse.com/thing:3127999. This thing should also work with the original Adimlab bracket.
Either way its function is to support the Y stepper from the back side and enable a second motor damper to be added.
You will need two m3x36mm or m3x40mm screws to mount a damper on the motor.
UPDATE: 12/2/18 Ran part through Netfabb to correct any errors. Also changed orientation for printing as suggested in the original part.
Category: 3D Printer Parts