Adimlab Stepper Reinforcement Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Y stepper motor metal bracket on the Adimlab i3 printer is very thin metal and it could bend easily. I also don't…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The Y stepper motor metal bracket on the Adimlab i3 printer is very thin metal and it could bend easily. I also don't like how it is mounted only on the top of the 2020 extrusion which lends itself to come loose.
This is designed to be installed on top of the original bracket to aid in stiffening and provide a second mounting support.
Update: 9/24/18 finally got around to mounting this on the printer. It works great!
Update: 9/27/18 repaired the mesh and re-uploaded the STL file.
Print Settings
Printer:
ADIMLab
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
100%
Filament:
Hatchbox PLA
Notes:
Print with the small tab pointing up as in the thingview picture.
Category: 3D Printer Parts