1 / 1
Drop BMR1 Speaker 100x100 Vesa Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the drop bmr1 speakers to a 100x100 vesa bracket using m4 nuts and screws.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model is 8mm thick, but I didn't test it with varying m4 screw lengths.
I used:
1. 4x m4 hex nuts
2. 8x m4 (16mm long) screws
You can probably use 12mm long m4 screws.
Added a 6mm thick version. (I mean og model I remixed it from has it 4mm thick iirc but 4mm kinda flexes a bit)
Added a 4mm thick version, should work with (10mm long) m4 screws
