Raspberry Pi 5 case for Autodarts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the case by @plammers_260162 so the top features just the Winmau Autodarts logo.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The Raspberry Pi 5 makes an excellent low power server for Autodarts.
Since I was going to be building several setups for friends I figured I would remix the case I've been using for a few years now to prominently feature the Autodarts logo.
If you opt to use this for your setup please share a make with the case and your final Autodarts setup.
I'm also the same username there, so feel free to friend me for a match some time!
Notes:
Supports only needed for the button
I find the button to be a little unreliable due to being a tight fit, so recommend sanding it down pretty significantly before assembly. It will feel like it's enough, then when the top is tightened down it will get stuck. I've had to disassemble a few times to sand it down enough to get it really reliable. You've been warned.