Adimlab Spool Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spool hub I remixed to fit my Adimlab i3 printer. The Adimlab i3 Gantry printer older version came with its…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a spool hub I remixed to fit my Adimlab i3 printer. The Adimlab i3 Gantry printer older version came with its own filament holder and I remixed the Quick Change Universal Spool Holder by making the center hole of the hub larger. Then I added a 20mm axle with a hole in it for the 8 mm steel rod that came with the printer.
It works way better than before. The filament holder feeds smoothly and no longer rocks back and forth.
Print Settings
Printer:
ADIMLabs
Infill:
30%
Notes:
I used a brim to print all 3 parts on the bed at the same time. Just add the STL objects for the slicer and go.
I had some issues, but found I had a loose belt so it didn't print with good round shapes. It still threads together though.
Category: 3D Printer Accessories