1 / 4
Moon Crater Soap Dish with Drainage — zdjęcie 1
1 / 4

Moon Crater Soap Dish with Drainage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cratered lunar soap dish with drain holes so the bar dries between uses. Print-ready 3MF included.

Ocena
4,667 / 5
Polubienia
136
Pobrania
224
Wydruki
2
Wyświetlenia
1124
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

A soap dish shaped like a piece of the lunar surface. The craters are not just decoration: the raised rims hold the bar clear of the base, and the crater floors are pierced so water runs straight through instead of pooling under the soap. The result is a bar that actually dries between uses rather than turning to mush.

The pitted surface also gives the bar something to grip, so it does not slide off when you set it down wet.

Print settings

  • Layer height: 0.2 mm

  • Infill: 7%

  • Supports: tree (auto)

  • Nozzle: 0.4 mm

  • Material: PLA

  • Sliced for Bambu Lab A1 mini

The included 3MF is sliced and ready to print. Light grey looks most lunar. For a bathroom, PETG holds up better than PLA against constant damp and hot water if you have it on hand.