Prusa-Core-One-Voron-Filtration - With Ledge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A addon for the Prusa Core One Advance Filtration to use the pellets I use with my Vorons.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 1
- Wyświetlenia
- 36
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A addon box to hold carbon and zeolite pellets for better filtration of the ASA and ABS printing gasses. I no longer smell any ASA when printing it now, just like i have with my Vorons.
Of course I have done other mods like a magnetic top and side panels with rubber gaskets to get a little better sealing on my core ones, but not too much, since i don't want to overheat the toolhead electronics.
I get the VaporX from Activated Carbon Department, since the Nevermoore stuff has been hard to get for years.
It does add some airflow restriction, but I can still feel air coming out. I need to get a smoke generator to see how the airflow is affected.
I had a top cover modeled, but I couldn't make it small enough to fit in the profile I wanted, and also have the airflow needed.
Use the 3mf to print as the "Screen" is generated via a infill modification.
Uses (6) 10x3mm magnets. I used N52 ones that I stock for projects.