Cometeer capsule lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lid which can be used to reclose an aluminum Cometeer coffee concentrate capsule.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
I wanted to refill Cometeer capsules with espresso to freeze, but I needed a way to close the top. So this is a quick model to solve the problem. Before you ask, I wanted to do this so I can transport espresso to work for afternoon americanos, but with my own coffee rather than continuing to repurchase single use Comateer capsules. I'm thinking I will try "flash freezing" with dry ice.
The height is 6mm, (2 mm top thickness, 2 mm seat area, 2 mm lip).
Diameter of the seat area is 51 mm.
Printed with Black TPU.
4 mm nozzle, 6 mm line
Use a randomized z seam with a long (30 mm) scarf joint; this help with water tightness.
Higher than normal fan speed will cause the thinner part to shrink in a little bit as it prints, which helps it grip the capsule.
No supports needed. There is a 1 mm lip around the edge of the opening, the first layer or two of this will droop a little, making the transition of the lip less pronounced. Its a feature, not a bug.