The Jefferson Memorial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Jefferson Memorial in Washington DC UPDATE: 20190519 Printed out and I didn't like the scaling. Increased in size…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 115
- Wydruki
- 1
- Wyświetlenia
- 590
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
The Jefferson Memorial in Washington DC
UPDATE: 20190519 Printed out and I didn't like the scaling. Increased in size 75%. If you scale it down don't go any further than 25% smaller or the columns will be too small.
UPDATE: 20190518 When I made this model it was for a flight simulator program and I had to make the model less than 500k.
I wanted to make this easier to print on a 3D printer so I have reworked it to make it higher resolution. I've split the model into 4 parts 3 parts should print without support, but the dome will likely need support. I would recommend gluing the building parts 1 & 2 together and leave the base and dome unglued.
When I get the chance I will add a suitable model of the Statue of Thomas Jefferson that resides in the middle of the memorial.
The original version is still included.
Category: Buildings & Structures