Klein Modbox Paper Towel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paper towel roll or electric tape holder for Klein Modbox
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I was not a fan of how much horizontal space the original model took up on the modbox rail, and there is a weak point that snapped between rail adapter and spool holder.
This model makes the spool sit vertically. Its 2 pieces and no supports needed
Included is files for a shorter and longer dowel, use longer one if you want more support for spool.
Recommended settings :
Bracket
PETG, 4 walls, 20% infill, outer brim, print on its side so point of pexagon faces up
Dowel
PETG 2 walls, 15% infill, outer brim, print horizontally
Dowel is Tight fit into bracket (on purpose), i used a bit of glue as well for good measure, seems to be holding up well