1 / 2
Valve Index Recessed Frunk Fan (Works with OG visor!) — zdjęcie 1
1 / 2

Valve Index Recessed Frunk Fan (Works with OG visor!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Valve Index Recessed Frunk Fan for use with 40mm fan that works with the included visor

Ocena
0 / 5
Polubienia
3
Pobrania
9
Wydruki
0
Wyświetlenia
111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Valve Index Recessed Frunk Fan

This frunk fan model integrates a 40mm fan (I used a Noctua but any will work) into the frunk of the Valve Index in such a way that the original plastic visor can still be used.

Materials:

  • 1x 40mm 5v fan

  • 1x USB cable (to harvest its USB-A male port)

  • 2x M3 screws

  • 2x M3 bolts

  • 4x M2 Bolts

Basically all you have to do is solder the fan onto the usb port's pins then unscrew the original frunk, screw the fan into the printed frunk with the M3 screws, then install the new frunk on the headset. Plug in the USB-A port and place the 4 M2 nuts on the visor magnets so it's offset from the headset for airflow purposes, and you're done!

This mod completely fixed how hot my index would get and if you use a Noctua fan it's completely unnoticeable both audially an vibratory. 

Happy printing!

Tagi