Q-Box SnapIn HighVolume DesiccantBox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap in Desiccant Box for the Qidi Box
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I added the cap as a separate .3mf I find it's not needed mind you. unless you plan on shaking and flipping the q-box. There's two caps in it. One is original, I find its too small (fractionally) and just rests in the hole, tho nearly perfect. The second cap is SLIGHTLY expanded, to more snug fit in the hole.
The Funnel should be self explanatory.
The Desiccant Box has been expanded from 92mm to 98mm and i added some snap in keystones that you press up in behind the hinge point of the q-box. You don't necessarily need the screw holes/ or screw it in anymore. However for the hole 2mins it'll take, you wont loose em that way.
Changes I made, but have yet to print (I don't need a second one till I get another box);
1: I printed a 2mm x 5mm radius fillet on the bottom back of the box. It did not print well and was un needed. I uploaded the 2x2 fillet witch will print and work better.
2: I shrank the funnels rectangle faces in by another 0.2mm all around. The one I used "worked" but was super tight and needed some flexing.