Case for Lilygo T3S3, with 18650 battery and charger.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For making a portable, battery-powered meshcore or meshtastic node.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a set of Lilygo T3S3 boards, and wanted to make them portable and battery-powered so that I can take them camping. They run for about a day with the 18650 batteries I use. A charger board can be added in the top of the case, so that the batteries can be charged via USB (note: NOT through the T3S3 board USB!).
You will need:
18650 battery
single 18650 battery holder
TP4056-based Lithium battery charger/protection board
some wire and a soldering iron
2 M3x14 screws to connect the battery case with the board case
1-2 M2x5 screws to attach the T3S3 board
The charger retaining block is used to push against the charger board to hold it in place, so it doesn't fall down on the battery or otherwise wobbles around.
The button is fit between the board and the case, so that it sticks out the hole at the front. That way, you can press the button on the board when the board is in the case.
I think the assembly is pretty straightforward, please let me know if you have any questions, have any comments, or just want to share your make!