M235 Armored Reconnaissance Vehicle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M235 ARV; a wheeled armored vehicle designed for use in 28mm wargaming.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- GNU General Public License v3.0
M235 Armored Reconnaissance Vehicle
Designed for use with minis in the "heroic" or 28mm scale as a Wheeled Armored Vehicle.
"Originally designed as a transport for motorized infantry, the M235 has a distinct long and narrow profile, making for a crammed interior. As such, it is more often employed as part of a recon element, though it still sees use as an APC. Lightly armed and armored, they rely upon their speed for survivability, only engaging targets it can handle and calling in supporting armor to handle the rest."
For casual wargamers who desire a wheeled APC. All parts are meant to be printed in FDM, though smaller parts could be printed in resin. The chassis prints in one piece; I recommend lightly painting support enforcers under the exhaust pipes on the back. Wheels print separately, preferably with the mounting stubs down and supports to build-plate; wheels should be a friction fit not requiring glue.
Turret prints in one piece, and can be inserted in any direction, with weapons snapping into position. Weapon options are:
40mm ACN (longer, with a larger barrel diameter)
20mm Chain Gun (shorter, with a smaller diameter)
70mm Low-Pressure Gun
As well as a rail to mount a 70mm ATGM launcher, and a mounting point for a pintle HMG. You may want to make sure the bottom of the pivot point inside the turret is supported for better functionality; it will still work without them, but snapping-in and moving it may feel "mushy."
It is recommended to print the weapons on their sides, so the part that snaps into the turret has the best mechanical strength. Example shown printed using various PLA at 15% infill and .2mm layer height; pictured with some 28mm soldiers for scale.
