Steering Wheel Rotary Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Steering Wheel Rotary Knob. I make this for my tractor mower and I can confirm that is verry usefull.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 992
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
My steering wheel section is 24mm*22mm. I use TPU for the damper so no hard plastic on the steering wheel.
I have added the Fusion360 files to let you modify as you want.
The bearings need to be placed when printing the knob, so you have to put pause just before printing over the bearing, place it, and resume print (see screenshot).
You can choose the orientation for fixings but I prefer to print it on side (see screenshot) with little support for fixing top.
I use variable layer for knob to minimize layer height to avoid overhang.
TPU for the damper and PLA for other part.
You will need :
- 1 * M5 x 30mm screw
- 2 * M5 x 12mm screw
- 3 M5 nut
- 3 M5 washer