Universal Clamp-On Headphone Holder – No Drilling | 60 & 110 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clamp-on headphone holder in two sizes. No drilling, no adhesive and no additional hardware required – just print
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple, strong and practical headphone holder for everyday use.
This clamp-on headphone holder mounts directly to the edge of a desk, shelf or workbench – no drilling, screws into furniture or adhesive required.
The holder is available in two lengths: 60 mm and 110 mm, so you can choose the version that best fits your setup and headphones.
Installation is simple: slide the holder onto the edge and tighten the 3D printed clamping screw.
The open design keeps the model easy to print while providing a strong and practical holder for everyday use.
Features
🔩 Clamp-on mounting – no drilling
🎧 Two sizes: 60 mm & 110 mm
🖨 Fully 3D printable
🛠 No additional hardware required
🔄 Easy to install and remove
💪 Strong, simple construction
🏠 Great for desks, shelves and workbenches
🎮 Perfect for gaming and PC setups
INCLUDED FILES
60 mm version
Headphone_Holder_60mm_Clamp25mm.stl
110 mm version
Headphone_Holder_110mm_Clamp30mm.stl
Clamping screw
Clamp_Screw.stl
PRINT SETTINGS (Recommended:)
Material: PLA / PETG
Layer height: 0.20 mm
Infill: 20–30%
Perimeters/Walls: 3–4
Supports: No
Brim: Not required
Nozzle: 0.4 mm
For heavier headphones or higher mechanical resistance, PETG is recommended.
INSTALLATION
Choose the holder size that fits your desk or shelf.
Slide the holder onto the edge.
Insert the printed clamping screw.
Tighten it by hand until the holder is secure.
Hang your headphones. 🎧
Do not overtighten the screw.